Peer-to-Peer Forum

 

Login Register    
Stereo in Vega Prime
Posted: 04 September 2010 04:19 PM  
Newbie
Rank
Total Posts:  5
Joined  2009-06-10

Hi all,
I am a new member and I have a problem, can you help me?
How to build an stereo application have 3 channel
Many Thanks!

 
Posted: 07 September 2010 12:40 PM   [ # 1 ]  
Member
RankRankRank
Total Posts:  78
Joined  2009-01-15

There is a sample called vp_stereo at
\resources\samples\vegaprime\vp\vp_stereo

Not sure if this will help you.

Steve

 
Posted: 07 September 2010 02:25 PM   [ # 2 ]  
Newbie
Rank
Total Posts:  5
Joined  2009-06-10
smjones - 07 September 2010 12:40 PM

There is a sample called vp_stereo at
\resources\samples\vegaprime\vp\vp_stereo

Not sure if this will help you.

Steve

I’ve tried, but this example makes only one channel
while my system is a multi-channel systems:
- Node_0: Master node
- Node_1, Node_2 and Node_3 are Slave nodes
- Have 3 Projector link to 3 slave nodes will render on a screen

CAN U HELP ME! MANY THANKS!

Image Attachments 
Screen.bmp
 
Posted: 07 September 2010 02:34 PM   [ # 3 ]  
Member
RankRankRank
Total Posts:  78
Joined  2009-01-15

Ok so this involves distributed rendering I imagine.  I have not done this so I’m afraid I will not be of great help.  Have you tried Presagis support as they are usually very good at solving issues like this?

Steve

 
Posted: 07 September 2010 03:00 PM   [ # 4 ]  
Newbie
Rank
Total Posts:  5
Joined  2009-06-10
smjones - 07 September 2010 02:34 PM

Ok so this involves distributed rendering I imagine.  I have not done this so I’m afraid I will not be of great help.  Have you tried Presagis support as they are usually very good at solving issues like this?

Steve

I can build a multi-channel applications, not stereo :D, hix
Thanks for your help

 
Posted: 18 October 2010 06:15 AM   [ # 5 ]  
Newbie
Rank
Total Posts:  14
Joined  2008-12-23

Hi All,

I have a similar requirement, I have to run a four channel Vega prime application in active stereo.
I enabled the stereo in the window panel, chose the pixel format which supports stereo , put the monitor to 120Hz and also enabled stereo in NVIDIA Control panel of my machine, still i am not able to pull off an active stereo output.

Also , i tested other samples that i had (of different APIs ) which were built for active stereo.
All of them are working fine, except for my Vega Prime output.

Can anyone please guide me on what are the do’s and dont’s for getting a nice active stereo output.

Just to make myself clear , what i need in my application is quadbuffer stereo. All other samples are working fine on QuadBuffered Stereo.

So kindly let me know if vega prime supports quad buffered stereo.

Thanks in anticipation,
Rohithzhere