Hello,
I am working with external reference buildings, and I come back to modify the height. Example:
1) Place a new external reference building set to fix height of 4m.
2) Want to change height to 3m, picked the just place building and select “Insert Transformation Matrix” box.
3) Select “Rotate/Scale To Point”, “Add After”, “Start Tool”, “Scale” button, enter center, reference point and to point.
4) OK to exit.
5) Need to change the height to 3.75m.
6) Pick the building and go back to “Insert Transformation Matrix” box.
7) Pick the “Rotate/Scale To Point” entry and try to change the height to 3.75m. The “To Point” is automatically selected, so put in 3.75 in the “Scale Length (Center <—> To):” box. Exit with OK and model disappears to a new location, high over the original position.
Current solution:
1)To change to 3.75m, at step 7 above after picking the “Rotate/Scale To Point”, delete that entry and reselect the “Rotate/Scale To Point” and redo step 3 with 3.75.
I have no problem with modifying “Translate” entry, pick a point on the model move it to where I want it no problem. What step am I missing, or am I suppose to delete the “Rotate/Scale To Point” and start it again?
Robert